1 / 1
Cutting Guide for Prusa Face Shield RC3 (Requires at least 240x240mm build plate) (OpenSCAD)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a cutting guide based on the laser cut spec diagram for the replaceable face shield sheets…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 100
- Makes
- 0
- Views
- 566
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
This is a cutting guide based on the laser cut spec diagram for the replaceable face shield sheets https://www.prusaprinters.org/prints/25857-prusa-protective-face-shield-rc3
It consists of a upper drill guide as well as a lower base for cutting the surrounding sheets.
I have not tested this design as it requires a build plate that is larger than my 200x200mm buildplate. But it may be of use for others.
- faceShieldSheetModel() : This is the model of the face shield sheet
- faceShieldDrillGuide() : This is the drill guide
- faceShieldCuttingGuide() : This is the cut guide with alignment holes
Being OpenSCAD it should be easy for you to adjust as needed if I made any mistakes.