Bergeon Watch Band Spring Bar Tool Handle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This tool holder will be able to use with any Bergeon 6767-** tool bits, as long as their base is 3mm in diameter.…
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 29
- Makes
- 0
- Views
- 622
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This tool holder will be able to use with any Bergeon 6767-** tool bits, as long as their base is 3mm in diameter. There is a slot built-in to put a square nut, it's the same nut that came with my Prusa printer, but you can purchase other M3 square nuts and they will work.
https://www.bergeon.swiss/catalogsearch/result/?q=6767 https://www.amazon.com/Stainless-Steel-Square-Nuts-Thin/dp/B073SB766G
STL includes a single-end and dual-end version.
Print Settings
Printer Brand:
Prusa
Printer:
Mk2.5s
Rafts:
No
Supports:
No
Resolution:
0.15mm
Infill:
20%
Notes:
You may want to set an auto-pause right before the slot close up, to put the square nut in, or you can manually pause. I used a brim to keep it on the bed as the surface area is quite small. Print with the piece lying down, with the tear-drop hole pointing up.
How I Designed This
The handle was designed to be printed lying down to maximize the rigidity of the handle when a perpendicular force is applied. The square nut allows the tool head to withstand great force without moving. The hole behind the square nut is very small clearance, so the m3 thread of the tool head will actually thread into the plastic. The hole before the square nut has a tear-drop design to prevent sagging due to printing a horizontal hole. This ensures ease of insertion of the tool head.
Category: Hand Tools