Yet Another Taranis X9 Lite pistol grip car / boat radio
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Merged design of the X9 grip with the throttle/stearing of the Tarantola NG You will need some M3 screws (Used Round…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 406
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Merged design of the X9 grip with the throttle/stearing of the Tarantola NG
You will need some M3 screws (Used Round Head Stainless M3x8).
Also you will need a new FFC cable (A, 7-10cm, 25 Pin Pitch 0,5).
For the optional USB Charger you will need a MT3608 USB Buck converter, set to 8.4V, and a 2S BMS (the compact one is preferred). Also a Holder for two batteries (I added pictures of all these).
You only need one Gimbal of the X9 Lite, the other one can be saved as spare part.
The daughter board for the external module needs to be removed (unsoldered) and you need to extend the connections to the front for a external module, if you want to have that.
Also some wires to extend the limit switches and the battery cable.
Update: Adjusted tolerances, add some guidings, seperated throttle holder, fixed alignment with the tool for throttle axis
Update: Fixed clearance issues for the bodies. Added manual of Tarantola as reference, aded pricture of Module wiring
Update: Added Axle for steering unit so you need only 1 Gimbal in total (Original Axle from gimbal for throttle, for steering you simply need the 2nd potentiometer + the printed axle.
Update: Added Keychain holder in Backcurve
Update: Fixed Position of Steering_Axle_Gimbal Pins, depending on your printer this part needs to be reworked to the steering will be in middle posiiton
Update:added steering_unit_front_plate6700 and Steering_Axle6700 for 6700 bearings instead of the original ones.
Update: Added Switchholder_Update, my Main Switch does not fit with the original design.
Update: Added Innerfront_Update, my Display did not fit in the original design.
Update: Added USB charging
Category: R/C Vehicles
