Brno University of Technology Coaster
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.01 – €2.46 net (excluding VAT)
For file: VUT_Coaster_0.15mm_PETG_MK3S_2h17m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.24 excluding VAT (range midpoint).
- Weight reported by the author
- 29 g
- Print time reported by the author
- 2.28 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Coaster with logo of Brno University of Technology / Vysoké učení technické v Brně
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 18
- Makes
- 0
- Views
- 141
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Brno University of Technology/Vysoké učení technické v Brně Coaster
Print was designed to be dual-colour with colour change aproximately on 2.00mm height. Height of change depends on your preferred layer height, but last layer of inner “T” ( white part) is set to be at 1.8mm( this height was used intentionally as it is mutual layer for 0.10, 0.15 and also 0.20mm layer height). Overall height of print is 3.6mm(dimensions of whole coaster are 100x100x3.6mm).
I recommend using PETG instead of PLA (or any more thermal resistant material if you intend to put hot drinks on it - you know, just to be sure, accidents happen). Both filaments I used were Devil Design PETG.
Included .gcode is in default 0.15mm QUALITY profile from PrusaSlicer with Devil Design PETG preset.
This project was printed @ FabLab Brno.
All logo copyright rights are reserved by Brno University of Technology.