29mm Minimum Diameter AV Bay
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
AV bay I designed for a 29mm Minimum Diameter rocket utilising a Bear Altimeters Anti duo and a 1s Lipo Battery
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 37
- Makes
- 0
- Views
- 306
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is an AV bay sled I designed for my 29mm “Blackhawk” rocket.
It uses an Anti Duo altimeter from Bear Altimeters, with a simple home made screw switch to arm.
It is made to fit precisely in a 5 inch 29mm Fibreglass coupler tube.
Holes are drilled in the coupler tube for rivets to secure to the upper airframe and a vent hole/switch hole.
A piece of 1000lb kevlar cord runs along the base, locked in place with two m3 nuts under compression.
A 200mAh 1s Turnigy battery (from Hobby King) is securely mounted inside the body.
I printed it in CF Nylon, at 0.2mm layers, upright with no supports, but with a large brim to keep it secure on a garolite bed.
It has been successfully tested to Mach 1 and over 5000ft on an I motor.