Drying rack stand for utensils
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.29 – €1.58 net (excluding VAT)
For file: Drying Assistant r1 6 slot rotated_0.3mm_PLA_215C_1h14m_23g.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.43 excluding VAT (range midpoint).
- Weight reported by the author
- 22 g
- Print time reported by the author
- 1.24 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a stand to help dry eating utensils (forks/knives/spoons/etc.) while maximizing the use of space
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 55
- Makes
- 0
- Views
- 238
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple stand to help your eating utensils dry while maximizing the use of space.
It has a 5 mm slot width and 10 mm spacing between slots. I've uploaded a 6- and 8-slot version.
Printing tips:
- There are two styles: rotated and non-rotated.
- Always print as oriented in the .stl.
- If your printer is able to bridge the slot width, I'd recommend using the rotated style, since the most visible part will be flat on the print bed and won't show layer lines.
If you'd like a version with a different configuration (slots, width, height, etc.), I should be able to easily create it (just message me).