Top Plate for Valeria Lamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a top plate/cover for the Valeria Lamp design over at https://www.myminifactory.com/object/3d-print-valeria-…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 89
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial
This is a top plate/cover for the Valeria Lamp design over at https://www.myminifactory.com/object/3d-print-valeria-lamp-21041 . I've posted two STLs, with slightly different gaps between the retaining walls. The thinner gap makes for a snug fit, but can be a bit difficult to install if you have any drips or threads in your print.
For those who might be interested, I have created a remix of the inner support; my remix fits the toolMoon tBulb LED assembly. I can't post that because the Valeria lamp author does not allow modifications, so PM me if you'd like either the STL or "instructions" as to how to mix your own. It's an easy job.
Print Settings
Printer:
anet a8
Rafts:
No
Supports:
No
Resolution:
0.06 mm
Infill:
100%
Notes:
Use 100% infil if you want a uniform translucent top, using clear or translucent filament. If you are printing with opaque, 20% should be fine.
I cut the top off the internal support of the lamp, added the base enclosing band, and added a second, shrunk version of that band.
Category: Fashion