Prusa Bear (Vibration Damping)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.00 – €1.22 net (excluding VAT)
For file: VibrationDumpCircle_0.2mm_PLA_MK3S_1h12m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.11 excluding VAT (range midpoint).
- Weight reported by the author
- 12 g
- Print time reported by the author
- 1.2 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Prusa Bear (Vibration Damping) squas balls (foam balls) it's very good damping. i used for a while it's super.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 42
- Makes
- 0
- Views
- 625
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Public Domain
It can be used on machine using 30x30 (or 20x20) profile extrusion frames. I used on prusa mk3 bear frame it's very good you can use 4 (2left 2 right) or 8 (2left 2 right 2 upper and 2 down) for better performance.
Also need PU Foam Golf Balls Sponge Elastic Indoor Aliexpress
Diameter: Approx. 1.63" / 41.5mm
Infill 20% no support.