1 / 1
Twisted Rib Vase
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Decorative Vase (not vase mode).
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 33
- Makes
- 0
- Views
- 237
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Ribs are ~1mm thick so I suggest making outer perimeter line width 1mm or 0.5mm depending on nozzle installed.
Print 0.28mm layer height or finer. Ensure there is no infill in the bottom (increase bottom layer count if there is). If the tips of the ribs are curling, you are probably too hot on the nozzle.