1 / 2
Sliding Lid Box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple sliding lid box. About 4" x 2" x 1.25"
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 152
- Makes
- 0
- Views
- 694
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
There are a lot of these designs out there but I wanted to make one that would print faster and use less plastic. This one prints in about 1 hour for both box and lid with a 0.6mm nozzle and 0.32 layer height. No supports required.
There is a small “bump” in the lid that snaps over the box edge and keeps it closed and a fingernail notch to help grip the lid handle. It makes a nice “snap” sound when closing.
The lid does not load into the slicer in the correct orientation. You need to flip it over so the “bump” faces upward.