Sapphire Pro/Plus Direct Drive
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The mod is for the default Hotend. I want to use the push fitting on outside from the extruder so i made an slightly…
- Rating
- 0 / 5
- Likes
- 31
- Downloads
- 257
- Makes
- 1
- Views
- 1,893
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The mod is for the default Hotend.
I want to use the push fitting on outside from the extruder so i made an slightly higher base and not to much waste material.
Information for installing:
Use 4x M3 8mm screws, the original is to short
The bowden between Hotend and Extruder is ~93 mm if you use an full metal heatbreak like me.
If you use the PTFE default heatbreak add 18mm to the above.
Print Settings
Printer:
CubeAnet8
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
25%
Filament:
Sunlu PTFE
Black
Notes:
I used gyroid infill.
The pictures only show the version of fast printed with 0.26 Resolution.Category: 3D Printer Parts