1 / 5
SV01 Pro 5015 Fan Shroud
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fan shroud for 5015 Blower fan on the SV01 Pro printer
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 101
- Makes
- 2
- Views
- 811
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
Fan shroud for 5015 Blower fan on the SV01 Pro printer
Note:
- Print on the side (as shown in photo)
- Add custom supports for the overhang
Overhang test model: https://www.thingiverse.com/thing:419860/files
From the test, the shroud could handle up to 80º overhang
Recommend print in PETG or better to handle high heat
Bill-of-Material:
- 2x M3 x 6mm Socket Cap screws
- 1x M3 x 4mm Socket Cap Screw
- 1x M3 x 20mm Socket Cap screw
EDIT: New revision R4 is added
- Fan mounting hole tighter so the M3 could self-tap into
- Adjusted the fillets around the fan open insert so it can fit easier