1 / 3
Velomobile front axle cap
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
To cover the front axle / bearings and improve aerodynamics of the velomobile.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 19
- Makes
- 0
- Views
- 227
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
To cover the front axle / bearings and improve aerodynamics of the velomobile. Designed for 15 mm axles with 11 mm inner diameter.
Printed in PETG, 0.3 mm, no support.
Update: added tubes in two sizes (0.3 and 0.45 mm thick) you may glue into the axle as a counterpart if friction is not strong enough to hold the caps in place.