1 / 1
Modular Glasses Rack
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made a quick little friction-fit glasses rack since the designs out there I wasn't a huge fan of.
- Rating
- 4.625 / 5
- Likes
- 166
- Downloads
- 974
- Makes
- 8
- Views
- 5,167
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
I made a quick little friction-fit glasses rack since the designs out there I wasn't a huge fan of.
You'll need one pair of tray and shaft per pair of glasses, but the top pair should use the cap instead of the shaft.
Print instructions
I used 0.2mm layer height, 10% infill.
Supports will be required on the shaft if you print them in the uploaded orientation (the way I've been). You could rotate them 90 degrees so the plug end of the shaft is up as well, but I have not tested that.