STACKED Face Shield / Visor Frame - 80mm 4 holes (BRAZIL and EUROPE)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
V2 REVISED: 15 stack, 3.9mm objects divide into 0.3mm layers exactly. Stacked for more efficient printing.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 62
- Makes
- 0
- Views
- 471
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other 3D Objects for Learning
- License
- Creative Commons — Public Domain
V2 REVISED: 15 stack, 3.9mm objects divide into 0.3mm layers exactly.
Stacked for more efficient printing.
Slightly improved design.
Recommended layer height: 0.3mm
Recommended material: PETG
Other materials and layer heights are unlikely to work.
Other recommended settings:
Fan speed: 50%
Print speed: Outer layers: 35mm/s, inner layers: 50mm/s
(slower for lower quality printers)
Bottom layers: 5
Top layers: 4
Bed temperature: 80
Nozzle temperature: 240
If layers are de-laminating, ensure fan speed is set to 50 and increase extrusion width, skin overlap and/or increase temperature.
Slice using slic3r, cura does not recognise gaps in model correctly.
Includes pre-sliced .gcode file for prusa MK3/MK3s