cubiio 2 "air assist" attachment
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I am experimenting to improve the airflow of the fan of my cubiio2 with an attachment which simply clips onto it. A…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 130
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I am experimenting to improve the airflow of the fan of my cubiio2 with an attachment which simply clips onto it.
A first test of the "air assist1" shows a slight improvement while using the laser to cut 2mm plywood.
"Air assist2" has yet to be tested.
Disclaimer: I do not know if the increased air resistance will damage the fan or overheat the laser diiode: use at your own discretion.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Yes
Supports:
Yes
Resolution:
0.2
Infill:
perimeters only
Filament: eryone PETG clear
Notes:
Print on its side.
I used tree support
Category: DIY