1 / 5
Sovol Sv01 5015 radial part cooling duct for v6 hotend — image 1
1 / 5

Sovol Sv01 5015 radial part cooling duct for v6 hotend

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Short update: Did some prints with that cooling duct and there is no sign of inadequate cooling on the prints, so I…

Rating
5 / 5
Likes
2
Downloads
40
Makes
1
Views
430
Reviews
1

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution

Short update: Did some prints with that cooling duct and there is no sign of inadequate cooling on the prints, so I guess the cooling capabilities with this duct are alright.

I tried to remix this great part cooling duct to make it work with 5015 radial fans and this is the abomination that came out :)

There's a version for the stock hotend mount and one version for this 40mm hotend mount: https://www.thingiverse.com/thing:4280757

The idea is to use threaded inserts for the 2 fan mounting holes, then first screw the duct onto the hotend mount using 4 M3 flathead screws which should fit into the recesses. Then screw the 5015 fan to the duct into the treaded inserts.

If you don't have threaded inserts you probably can use a nut between extruder and duct to fixate the fan.

I'm sure the airflow isn't that great but I just printed a bridging test and it turned out quite good.... if that says anything..

Print Settings

Printer:

Sovol SV01

Rafts:

No

Supports:

Yes

Resolution:

0.28

Infill:

100%

Filament:

Herz PETG

toffee caramel


Notes:

Supports touching buildplate only.

Category: 3D Printer Accessories

Tags