Interlocking Honeycomb Pots / Wall Display - Vase mode
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Interlocking hexagonals printed in Vase Mode (setup 0.6mm line width)
- Rating
- 5 / 5
- Likes
- 110
- Downloads
- 343
- Makes
- 2
- Views
- 1,619
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Share Alike
Interlocking hexagonal pots printed in Vase Mode / Spiralized Outer Contour. They can be used as small pots or the large ones vases or multiple attached to a wall for a honeycomb display. Each pot has tabs allowing it to lock to adjacent pots of the same width.
Tested with 0.4mm nozzle, 0.6mm line width, 0.2mm layer height on the 50mm size one.
Print the smaller one to test fit the tab and adjust the “horizontal expansion” value in the slicer settings if needed.
The parts can be scaled in height but not other dimensions. I recommend printing the larger 100mm one with a larger nozzle and larger line width as they're quite flexible.
Comment if you'd like a different size.