1 / 1
Prusa Face Shield RC3 Vase Version
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
You can print forehead part in vase mode which will speed up printing a lot.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 106
- Makes
- 1
- Views
- 927
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Masks
- License
- Creative Commons — Attribution — Noncommercial
You can print forehead part in vase mode which will speed up printing a lot.
Slightly better model in:
https://www.prusaprinters.org/prints/29219-face-shield-in-33-minutes
Print instructions
Set this in PrusaSlicer even if you have 0.4 mm E3D v6 nozzle:
Print Settings
- Layers and perimeters
- Vase mode: on
- Solid layers:
- Bottom: 0
- Solid layers:
- Vase mode: on
- Advanced
- Extrusion width
- First layer: 1
- External perimeters: 1
- Slicing
- Slice gap closing radius: 0
- Extrusion width
The rest set according to Prusa recommendations. Don't be affraid of the line in the front. If you use high temeperature it will melt together well like layers. If not, reduce acceleration in X and Y axes.