1 / 2
Skadis Holder: 60mm Solvent Pump Bottle (uses heat set inserts) — image 1
1 / 2

Skadis Holder: 60mm Solvent Pump Bottle (uses heat set inserts)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Ikea Skadis holder for a 60mm diameter solvent pump bottle, using heat-set inserts and printed hooks for mounting

Rating
0 / 5
Likes
15
Downloads
85
Makes
2
Views
499
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Share Alike

Simple Skadis holder for common 60mm diameter solvent pump bottles.

This model requires M2.5 heat-set inserts, M2.5 screws, and printed hooks.

Required Parts

Printing Notes

For printing any heat-set insert project on a FFF/FDM printer its a good idea to use 4+ perimeters to make sure that there's enough surface for the inserts to bite into.

My test and final prints were done on a stock Prusa MINI+ with Prusament PETG. PLA and other materials should work fine though.

Tags