Skadis Holder: Latex Glove Box (uses heat set inserts)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ikea Skadis holder for standard-sized latex glove dispenser boxes, using heat-set inserts and printed hooks for mounting
- Rating
- 0 / 5
- Likes
- 57
- Downloads
- 157
- Makes
- 0
- Views
- 1,409
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
Skadis holder for standard sized (220mm x 120mm x 75mm) glove dispenser boxes.
Slightly overengineered to aid in easy, reliable, and rapid repositioning to fit different workspace needs.
This model requires M2.5 heat-set inserts, M2.5 screws, and printed hooks for mounting and M3 heat-set inserts and M3 screws for assembly.
Required Parts
- Printed hooks
- See linked project for more details
- M2.5 heat-set inserts (x8, for mounting)
- CNC Kitchen “M2.5 Standard” (ø 4.6mm, depth 4.0mm)
- Prusa Eshop ($11.99, 100 pcs)
- CNC Kitchen Store (€9.99, 100 pcs)
- CNC Kitchen “M2.5 Standard” (ø 4.6mm, depth 4.0mm)
- M2.5 screws (x8, for mounting)
- McMaster Carr 92000A105 (8mm, $4.74, 100 pcs)
- M3 heat-set inserts (x10, for assembly)
- CNC Kitchen "M3 Standard (ø 4.6mm, depth 5.7mm)
- Prusa Eshop ($10.99, 100 pcs)
- CNC Kitchen Store (€9.40, 100 pcs)
- CNC Kitchen "M3 Standard (ø 4.6mm, depth 5.7mm)
- M3 screws (x10, for assembly)
- McMaster Carr 91290A115 (10mm, $9.54, 100 pcs)
- These fancy black-oxide hex-socket screws fit perfectly flush in the front panel and look great, however any 10mm M3 screws with a head diameter smaller than 5.75mm should work fine
- McMaster Carr 91290A115 (10mm, $9.54, 100 pcs)
Design/Assembly Notes
This project requires printing of four parts, in addition to the hooks mentioned above:
- Base Left
- Base Right
- Plate Left
- Plate Right
When assembling, the front plates are likely to be 2-4mm from the risers they screw into. This is by design, since there can be some variability in the actual depth of the cardboard box itself. Chamfers are included in various positions to allow for cardboard box size variations and flexing as well. The result should be a snug, solid fit when assembly is complete.
The tradeoff for this snug fit is that swapping a box out can be a bit of a pain, requiring disassembly and reassembly.
Printing Notes
For printing any heat-set insert project on a FFF/FDM printer its a good idea to use 4+ perimeters to make sure that there's enough surface for the inserts to bite into.
My test and final prints were done on a stock Prusa MINI+ with Prusament PETG. PLA and other materials should work fine though.
File Notes
An unfortunate Fusion 360 crash resulted in the loss of the source file data, so no STEP, STL, or F3Z source files are available for this project.
I like to provide those with all of my projects to make printing or remixing as easy as possible but, alas, the stars weren't aligned for this one. Sorry about that! :(