1 / 2
Skadis Holder: Solder Spool Rail (uses heat set inserts) — image 1
1 / 2

Skadis Holder: Solder Spool Rail (uses heat set inserts)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Ikea Skadis holder for solder and wick spools, using heat-set inserts and printed hooks for mounting

Rating
0 / 5
Likes
30
Downloads
149
Makes
0
Views
713
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Share Alike

Simple Skadis holder for solder and desoldering wick spools with 18mm+ internal diameter.

This model requires M2.5 heat-set inserts, M2.5 screws, and printed hooks.

Required Parts

Printing Notes

This model has two parts, a body and a rail that fits between its arms. These two are basically friction-fit. This works fine for my use case but admittedly it could be improved quite a bit, so feel free to remix it into something more resilient. :)

For printing any heat-set insert project on a FFF/FDM printer its a good idea to use 4+ perimeters to make sure that there's enough surface for the inserts to bite into.

My test and final prints were done on a stock Prusa MINI+ with Prusament PETG. PLA and other materials should work fine though.

Tags