1 / 6
BSE_01 Cyberdeck
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Contest entry for the Hackaday 2022 Cyberdeck challenge.
- Rating
- 0 / 5
- Likes
- 90
- Downloads
- 137
- Makes
- 0
- Views
- 4,454
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Hackaday.io Project Page
The future is here, it's just not evenly distributed" - William Gibson
This is a custom built cyberdeck designed around a raspberry pi 4, waveshare 12.3" screen, 12v Battery, and a mechanical keyboard.
Print:
- 4 x Bottom Edge Fill
- 4 x Top Edge Fill
- 4 x Hex Foot
- 2 x Corner Piece Top
- 2 x Corner Piece Bottom
- 1 x Hinge Base left
- 1 x Hinge Top Left
- 1 x Hinge Base Right
- 1 x Hinge Top Right
Cut:
Ponoko
- 1 x Faceplate [3mm Thick Acrylic]
- 1 x Bottom Plate [3mm Thick Acrylic]
- 1 x Battery Plate [3mm Thick Acrylic]
- 1 x Computer Cover [3mm Thick Acrylic] Translucent Recommended
Sendcutsend
- 1 x Case Bottom [2.5mm Aluminum]
- 1 x Case Top [2.5mm Aluminum]
Purchase:
- Amazon Parts List
- 2 x 10mm x 30mm Shoulder Bolts
- 2 x 6900-2RS Bearings
- 1 x 10mm x 0.1mm Ring Shims
- 1 x M4 FHS x 12mm
- 5 x M4 x 16 Standoffs
- 5 x M4 x 22 Standoffs
- 90deg Countersink Bit