Flexible Can Lid (watertight)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Watertight on most normal cans, 75mm diameter / 415g cans. Also see my PLA versions if you have no fkexi filament. And…
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 73
- Makes
- 0
- Views
- 375
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Watertight on most normal cans, 75mm diameter / 415g cans.
Also see my PLA versions if you have no flexi filament.
And see my large version of this lid.
Avoid brittle PLA's for this, it needs some flex.
Print settings (Cura):
Walls x 3
Top/Bottom x 6
.2mm layer height
.4mm width
215c print
60 c bed
30mm/s
Flow 100% (I usually use 94% but aparently flexibles need a bit more flow)
Coasting enabled
Coasting Volume 0.032 (helps remove the seem)
Fan 0% first layer to 50% at layer 5
No brim or skirt needed
Print Settings
Printer:
Voxelab Aquila S2
Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
nonw
Filament:
SpiderMaker
Spider Flex TPE 75A
Iron Blue
Category: Containers