1 / 9
F1 Suzuka Circuit Japan with elevation, to scale — image 1
1 / 9

F1 Suzuka Circuit Japan with elevation, to scale

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Suzuka International Racing Course with elevation and to scale.

Rating
0 / 5
Likes
12
Downloads
73
Makes
0
Views
1,081
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Suzuka International Racing Course with elevation and to scale.

 

Printing: At 190% you can fit it on an Ender 3 (V2), an Aquila or any other printer with a 220x220mm bed. I have attached a premade 3mf for Prusa Slicer (2.5.0). Make sure to print with snug supports if you don't like wasting too much filament.

At 100% scale I would recommend printing on an resin printer (SLA) or at ≤0.12 layer height very slowly. Proper support separation needs to be accounted for this scale so as to not break the print while detaching the supports.

 

There are two variants, one straight out of onshape, very detailed but with some open faces and one (recommended) at 50% detail and with the open faces fixed (using Meshmixer).

 

Time: it took 5 hours and 21 minutes at 190% scale on my Aquila running Klipper. I used rainbow PLA from SunLu.

 

The model was made from scratch in onshape using data from the Formula 1 website.

Tags