Justin's microridge mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Men
- License
- Creative Commons — Attribution — Noncommercial
Thanks to Justin for giving me his CADD file so I could modify. I modified to make the side with the airtag a little thinner except around the airtag. Also modified the paths of the bands to be a little less tight. Just uploading the one version of his many great options.
PLA
15% infill
3 parimeters.
If you want a version without the Airtag holder, you can cut this off in the slicer just leaving a hole in that plate.
Also, if you want to push cards from the opposite hand, mirror both pieces in the slicer.
(These may be obvious solutions, but thought I would throw them out there.)
Edit 10-22-2022: Adjusted the piece that holds the airtag so it snaps in better.
Edit 09-20-2023: I decided to try to learn OnShape, so I recreated the wallet in Onshape with slight modifications, uploaded those STL files.