Corona Face Shield
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.94 – €2.37 net (excluding VAT)
For file: shield-simple_06n_035mm_petg_mk3smmu2s_1h29m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.16 excluding VAT (range midpoint).
- Weight reported by the author
- 44 g
- Print time reported by the author
- 1.48 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A remix of https://www.prusaprinters.org/prints/25857-prusa-protective-face-shield-rc (stolen bottom reinforcement).
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 66
- Makes
- 0
- Views
- 741
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Masks
- License
- Creative Commons — Public Domain
A remix of
https://www.prusaprinters.org/prints/25857-prusa-protective-face-shield-rc (stolen bottom reinforcement).
and inspired by
https://www.prusaprinters.org/prints/25714-pomoznemocnicisk-protective-shield (reduced material, zip-ties instead of screws)
The sheet/film width is up to 25 cm. I used the Prusa face shield sheet version - without the holes. PETG was sold-out, so I bought 0.3 mm and 0.5 mm transparent PVC film. The 0.5 mm version is firmer, but the optical quality is worse - less transparency and there are traces of rolling somewhere visible. But the 0.3 mm version is OK. The reinforcement holds its position without any holes on the film.
The holes are sized for 2.5 mm zip-ties. Like those used on Prusa printers. Print the template to easily mark where to punch the holes.
Print instructions
I used 0.6 mm nozzle and 3 perimeters.