Amazon Basics Keyboard Leg
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Amazon Basics keyboard is a decent keyboard at a great price, however it doesn't have any keyboard legs, and the…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 17
- Makes
- 0
- Views
- 213
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
The Amazon Basics keyboard is a decent keyboard at a great price, however it doesn't have any keyboard legs, and the "ridge" it has on the back doesn't raise the keyboard up from "flat" very much at all. So I designed some simple legs that sit under the ridge and raise it up to a more reasonable height.
The legs have a decent tolerance, one of mine stays on when you lift the keyboard up, the other falls off shortly after you lift it. I don't really want to make it any tighter, since that might make it too tight for some printers, and the keyboard has a glossy finish anyway, so it still wouldn't guarantee the legs would stay in place. If you want to make the legs stay put, you can use a 3M Command strip between the large flat panel and the bottom of the keyboard.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
.20
Infill:
10%
Filament: Prusament PLA Blue
Notes:
If you have issue with the thin pieces peeling off the bed, you might need to use a brim or turn off the fan for the first several layers.
Category: Computer