Lead Z screw holder hypercube (long) - And Hypercube 300 V1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
As I flipped by Z motor mount upside down to get 20mm more Z height the Z screw was now to short to fit in the holder.…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 50
- Makes
- 0
- Views
- 322
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
As I flipped by Z motor mount upside down to get 20mm more Z height the Z screw was now to short to fit in the holder. So added 20mm to the height and made the hole 9mm instead of 8mm as the bearing holds the rod.
Aug-21-2021: Added z-axis-align-300 for the Hypercube 300 V1. It needed to be a little thicker.
================================================================= https://www.thingiverse.com/thing:4441076 Simple leadscrew holder to provide extra support for z-axis.
The piece requires one 608zz bearing that is pushed into the center.
The center of the bearing aligns with the leadscrew.
Distance from the 2020 profile: 21mm
Center hole: 8.2mm
Outside hole: 22mm
Print Settings
Printer Brand:
Anycubic
Printer:
Semi-closed 4Max
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament: any any any
Category: 3D Printer Parts