Gem Tipped Spear plus mold.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 2 meter (6 foot+) Jewel-cut tipped spear. Verry sharp. Advise you use TPU or blunt the tip or take much care handling
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 55
- Makes
- 0
- Views
- 483
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial
This is a .3MF file featuring a 2 meter solid spear plus 10 numbered mold tubes that screw together to create a single 2 Meter long mold. Idea being to print the mould in PLA, spray it with mould release or oil or something, fill with liquid silicone packed with some filler material to save costs and add rigidity - or you can cut the spear into manageable pieces and glue in post, or just scale the spear down and print it. I don’t recommend scaling the mould down too much or the screw threads will be too tight.
supervise children, very sharp.