Star Dodecahedron (Solid or Vase Mode)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.35 – €2.87 net (excluding VAT)
For file: StarDodecahedronVase_0.3mm_PLA_MK3SMMU2S_2h12m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.61 excluding VAT (range midpoint).
- Weight reported by the author
- 41 g
- Print time reported by the author
- 2.21 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Star Dodecahedron (Solid or Vase Mode)
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 64
- Makes
- 5
- Views
- 327
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Share Alike
Star Dodecahedron (Solid or Vase Mode)
Printing Instructions
Vase Mode:
This can be printed at .3mm but it creates an interesting decorative defect at the bottom of the bottom star.
This may not be for everyone. If you don't like the defect, print at lower layer heights (.2mm or .1mm) and consider decreasing the scale.
Solid Mode:
Recommended: .2mm layer height and lightning infill.
Using the larger point model will give you more even star shapes but will require supports.