Flair 58 Control Box Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a small fixture to mount the Flair 58's electronic control box to the neck of the machine.
- Rating
- 5 / 5
- Likes
- 38
- Downloads
- 361
- Makes
- 3
- Views
- 2,767
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Public Domain
This is a small fixture to mount the Flair 58's electronic control box to the neck of the machine.
It's not absolutely perfect. As seen in the photos there I've added a small adhesive rubber bumper to the inside of the mount. Without the rubber bit, it may jiggle a bit so anyone who wants to modify it could make the collar smaller so it can friction fit a bit tighter. I'm uploading this as is since it works and I don't think its worth printing another copy.
I printed this with the mounting side facing the bed. There should be minimal supports neede only at the neck of the bridge. This took me 3.5hrs to print at 0.2mm layer height.
Other materials needed is just a strip of double sided tape, I used the 3M foam kind and it holds pretty well and can be readjusted if needed.
Hope this helps anyone who owns a Flair 58!