Stepper motor cover X-axis with endstop switch - Mega Zero
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mega Zero v1 or V2 X-axis stepper motor cover with endstop switch. It uses one of the endstop switch with the metal…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 0
- Views
- 258
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Mega Zero v1 or V2 X-axis stepper motor cover with endstop switch. It uses one of the endstop switch with the metal bracket to screw into the cover. The stock parts cooling fan housing on the hotend will hit the switch. Note that the prints will be mirrored, so mirroring in the slicer is necessary.
Uses two screw in points on the X-axis stepper motor.
Supports not needed, depends on you. Will need to flip your X axis stepper motor wiring, or invert it in the firmware.
Print Settings
Printer:
Mega Zero
Rafts:
No
Supports:
No
Resolution:
200
Infill:
16% with more infill flowrate
Filament:
any any
Category: 3D Printer Parts