1 / 2
LabRadar Sight
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A better sight for the LabRadar chronograph.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 129
- Makes
- 0
- Views
- 572
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
With this sight you can aim your LabRadar faster and more accurately. I looked at various sights available, took some measurements of my radar, and came up with this design.
I printed mine with PETG, 0.2 layer height, 15% infill, no supports. The .stl is in the correct print orientation (flat side down). You will need a M5x40 screw or bolt to attach the sight.