1 / 2
Keyboard feet for HP KU-0316 keyboard — image 1
1 / 2

Keyboard feet for HP KU-0316 keyboard

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Legs for HP keyboard KU-0316 and KB-0316. May fit other HP keaboards.

Rating
5 / 5
Likes
2
Downloads
113
Makes
2
Views
438
Reviews
2

Updated at source:

Model information

Category
Computers
License
Creative Commons — Public Domain

I recommend you print left and right part, even if you need only one replacement. Reason is that these parts are not 100% same size as originals. If you leave one original part, keyboard might not be levelled.

Print settings:

  • 0,1 or 0,12 mm height
  • use supports for pins

After print is finished, cut material left from supports on pins, so the pins fit holes. If pins still don't fit holes, you can cut pins a little to fit.

Gcode file already has supports. Gcode settings:

  • PLA temp = 210°C
  • bed = 55°C
  • ABL is used

Tags