Spice rack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a spice rack which uses 1/4" (6.35mm) dowels and 3M Command Strips (or double-sided tape equivalent) to attach.
- Rating
- 4.667 / 5
- Likes
- 41
- Downloads
- 215
- Makes
- 5
- Views
- 1,578
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
This is a spice rack which uses 1/4" (6.35mm) dowels. There is a slot on the back side of the bracket so it mounts flush when using a 3M Command Strip. The brackets are narrow so the command strip needs to be cut in half lengthwise. If you don't have any Command Strips, any double-sided foam adhesive tape should work.
It should fit all standard size spice jars.
Directions:
- Print one of each side
- Cut 3 dowels to the same length
- Glue the dowels into the holes (I used hot glue)
- Apply command strip to the slot on the back of each bracket
- Apply to your cabinet door
Update 2023-09-23: At the suggestion of @RCNet I've added a version where the base extends in the opposite direction.
Update 2021-03-36: After 2.5 years, one of the command strips let go, so I redesigned the base to accept full width strips for better hold. Update: 2.5 years later and it's still holding!
Update 2020-08-16: Added version for use in the center of the rack. Thanks @xaviervilla for the idea of making a version with the holes all the way through for use as a center support.
Category: Organization