1 / 2
3M Painters Tape Label for 20mm Rail
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Make your own Labels with 3M Painters Tape
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 19
- Makes
- 0
- Views
- 336
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The file available for download has a 1"x1" face. It can be scaled in the width direction if you need a longer piece for a bigger label. It fits nicely on an extruded aluminum 20mm rail.
Printing Notes
- The .stl will need to be flipped 90 deg, so it is flat on the print bed.
- I use a 0.2 mm layer height, and supports were not needed
Label Ideas
- Printer's name/number
- E-step formula (I can't be the only person that needs to look those up every time…)
- Printing tips such as z-offset
- Maintenance/print records (last time bed was leveled, how much filament is left on the spool, etc.)