1 / 3
Filament Pully for Ender 3 direct drive or similar — image 1
1 / 3

Filament Pully for Ender 3 direct drive or similar

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Pully for a direct drive ender 3 or other similar printer so filament spool can be mounted beside the printer.

Rating
0 / 5
Likes
3
Downloads
22
Makes
0
Views
362
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

I converted my enter 3 to direct drive but didn't have room to mount the spool above the printer. This meant the filament came in at a sharp angle and the spool would start rocking as the head pulled the filament back and forth. 

This uses 6mm airsoft BBs as bearings. To assemble, place one half of the hub inside the wheel and fill with BBs, place other half of hub on top then snap the base on top and snap the base on top to lock everything together.. Mount to rail bar with T-nuts. The guide keeps the filament from jumping off and has a gap that can be turned down to allow the filament to be removed without removing from the print head.