T slot nut for 3018-pro router table using bolts instead of flat screws
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of FEW's T slot nut using G-workz3D's m6 nut to modify for use with bolts instead of tapered flat head M6 screws.
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 148
- Makes
- 1
- Views
- 594
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of FEW's T slot nut using G-workz3D's m6 nut to use with bolts instead of tapered flat head M6 screws. Screw hole is left intentionally a bit snug and will not allow bolt to enter without very minor filing. I wanted them to fit and not back out on their own. Cutting a .2mm oversized center hole should allow this without filing.
I did also remove .2 or .3mm in thickness from the two sides that slide in the T slot. They were a little tight for my Twotrees 3018-pro.
Printed with Inland Pro PLA Lulz Green, 0.6 hardened nozzle (.4 would work better here), 220c, .24 layer height. 4 walls, 15% infill, with top of model, as installed in CNC table, facing the build plate using supports for the two sides for the T slot.
License applied as per original post by FEW.
Original file - https://www.printables.com/model/214435-t-slot-nut-for-sainsmart-3018-pro-router-table
Nut used to model this by G-workz3D - https://www.printables.com/model/192661-m6-nut