soapholder - držák na mýdlo
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
holder for soap with concealed screw holes - držák na mýdlo do sprchy či koupelny
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 33
- Makes
- 0
- Views
- 204
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Public Domain
3MF is modeled for PLA with a perforated bottom, as shown in the picture. The holes are adapted for screwdriver insertion. Wall screws should be at least 8mm in size with a larger head. The size of the model is set to fit smaller Johnson and Johnson baby soaps, adjust accordingly for larger ones (also be mindful of adjusting the height of the perforation).
better 0.2 mm speed
3MF je vymodelovaný pro PLA s perforovaným dnem, jak ukazuje obrázek. Otvory jsou uzpůsobené pro pro prostrčení šroubováku. Šrouby do zdi jsou vhodné min. vel. 8mm. s větší hlavou. Velikost modelu je nastevena na mýdla menší Johnson and Johnson baby, tu si podle potřeby nastavte větší (pozor také na úpravu výšky perforace).