1 / 5
IKEA 365+ 10.8l sliding desiccant container for Drybox — image 1
1 / 5

IKEA 365+ 10.8l sliding desiccant container for Drybox

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Sliding desiccant container for the lid of the IKEA 365+ 10.8l drybox

Rating
4.5 / 5
Likes
48
Downloads
150
Makes
2
Views
3,578
Reviews
2

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Share Alike

This desiccant box uses the lid of the IKEA 365+ 10.8l. I wanted to be able to remove the desiccant more easily than other solutions and came up with attaching the desiccant container to the lid. 

It is assembled with doulbe sided acyrlic tape. Be sure to use something that is working with the PP of the box.

I used transparent PLA for this print, but PETG could work too (maybe the retention will be slightly worse, due to the smaller stiffness of the material).

The grid pattern is created inside prusa slicer with the infill settings for separate bodies inside the model (50% Grid pattern without top or bottom layers). Check the attached 3MF files or use the existing GCODE-files.

The box is removed by slightly pushing the Ikea lid from the inside and then sliding the printed desiccant box to the side.

Have fun with this design.

Tags