MK3S Raspberry Pi Zero W Cover
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.19 – €0.23 net (excluding VAT)
For file: Printed using generic orange PETG / raspberry_cover_02mm_petg_mk3s_14m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.21 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 14.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
MK3S Raspberry Pi Zero W Cover based on Steve's Fans Covers
- Rating
- 4.852 / 5
- Likes
- 75
- Downloads
- 953
- Makes
- 18
- Views
- 3,630
- Reviews
- 27
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Public Domain
MK3S Raspberry Pi Zero W Cover based on Steve's Fans Covers
Print instructions
Directly use the 3mf or gcode if it fits your print. Otherwise you'll just need to configure:
- Zero top and bottom horizontal shells.
- Five perimeters.
- Honeycomb infill (15%)