1 / 1
Not Currently NIH Approved, A4 Remix, Outer Pegs Moved 2/3mm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I created this part to help our group #3DPPGH to make usable face shield kits.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 31
- Makes
- 0
- Views
- 274
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I created this part to help our group #3DPPGH to make usable face shield kits. Having fixed the inconsistent width of the currently validated DtM v3.1 NIH model, the splatter gaurd now prints so tough that it is difficult to bend the front band to allow for the clear shield.
In this model, I have taken the two outermost pegs and "swung" them inwards towards the center pegs along the same 100mm radius by an arc length of 2/3mm. This should allow for the shields to be assembled without too big of a fight.
GO #3DPPGH