Mod Wing 17mm spacer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I felt like the mod wing on my holster needed some more depth to avoid printing when carrying.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 79
- Makes
- 0
- Views
- 363
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
Mod Wing on my holster shipping with 2 spacers, one 10mm and one 14mm and I felt that some more depth would be better, so I modeled a taller one that is 17mm.
The gcode file is with supports and Prusament PETG 100% infill with .15 layer height. Takes about 43 minutes to print. I use 3 permiters in the print.
I think printing it as the .3mf file is oriented is the best way to minimize the chance of breaking. Rev 2.1_long reflects this.
Rev 2.1: Cleaned up spacing of locating pins, and increased radius of corners from 2mm to 2.5mm