Suitcase wheel and leg replacement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement luggage wheel - 60mm leg - 70mm total length for Christiano luggage.
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 59
- Makes
- 0
- Views
- 674
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Share Alike
WIP.
Working on v2 after examining v1 after use.
Replacement for 70mm tall leg and wheel part, with 60mm wheel diameter.
See hardware-recess.scad for the import of recess for M3 and M5 bolts and nuts – https://github.com/avolkov/openscad-designs/blob/master/libs/hardware-recess.scad
See draft_notes.pdf for all of the measurements and design drawings.
BOM
- 2x 608 bearings
- 1x 45mm M5 bolt
- 1x M5 acorn nut
- 1x 35mm M5 bolt
- 1x M5 nyloc nut
Washers, with one of the washers already greased and installed into the base of the leg.
- 2x 40mm M3 bolts to hold the layers. 35mm are better, fit, but I don't have those.
- 2x M3 nuts
Print instructions
Leg: material -- PETG, solid layers/perimeters 3, infill 30%, layer height 0.2mm
Wheel: material – TPU 91A, layers 4, permieters 3, infill 15% (should be more feels a little soft, but works), layer height 0.2mm
Sleeve: material - TPU 91A, layers/perimeters 1, infill 10%, layer height 0.2mm
Orient objects as described in *.3mf files, consult these files for more print settings.
Assembly instructions