COVID-19 Emergency mask with the use of cotton pads as a filter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This mask provides a valve for inhalation and exhalation that allows you not to accumulate moisture in the mask .
- Rating
- 4 / 5
- Likes
- 92
- Downloads
- 806
- Makes
- 3
- Views
- 4,688
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Masks
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This mask provides a valve for inhalation and exhalation that allows you not to accumulate moisture in the mask .
I designed 2 mask sizes Adult/male and child/female. For printing, you will need Flex plastics, the best fit is TPU
You can use cotton pads as a filter. After each use, discard the discs and wash the mask in hot water (not boiling water). models: valve 3 pieces, seal 2 pieces and brim 2 pieces, printed with TPU plastic. For a large model, the brim is divided into 2 parts due to the fact that my printer did not fit in size .
ATTENTION! the second brim should be mirrored! For the small version of the respirator, there is a combined brim version. Brim should be glued to the body of the respirator with super glue! BE SURE TO WAIT FOR THE GLUE TO DRY!
Have a good print, ask questions, and I will try to answer them promptly if there are any difficulties in printing
Print instructions
Rafts:
Yes
Supports:
Yes
Resolution:
0.2
Infill:
30
Filament_brand:
any
Filament_color:
any
Filament_material:
PLA/PET-G , TPU