Toy excavator
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€12.65 – €15.46 net (excluding VAT)
For file: Toy Excavator_0.3mm_PLA_MK3S_11h59m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €14.06 excluding VAT (range midpoint).
- Weight reported by the author
- 219 g
- Print time reported by the author
- 11.99 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Excavator with moving parts
- Rating
- 4.806 / 5
- Likes
- 526
- Downloads
- 2,698
- Makes
- 34
- Views
- 11,105
- Reviews
- 31
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial
Toy excavator with moving parts.
I used 2mm aluminum tig rod as the pivots. Tooth picks or filament may also work depending on the scale.
It will need supports on parts of the track base and at the end of the main arm, all included in the 3mf.
Please be careful when attaching the tracks and the body together, rotate and put even pressure and it should go in well.
A small amount of vegetable oil will help the rotation.