Prusa i3 MK3s Raspberry Pi4B case profile mount for octopi
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.12 – €2.59 net (excluding VAT)
For file: rpi4b_part_camera_slit_015mm_petg_mk3s_3h6m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.36 excluding VAT (range midpoint).
- Weight reported by the author
- 15 g
- Print time reported by the author
- 3.1 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
My first remix design for a 3D print!
- Rating
- 4.844 / 5
- Likes
- 174
- Downloads
- 1,050
- Makes
- 31
- Views
- 8,466
- Reviews
- 45
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU Lesser General Public License
My first remix design for a 3D print!
I added the hooks to the case such that it can be screwless mounted to the horizontal profiles at the bottom of the prusa MK3s printer.
- RPi4B case: https://www.prusaprinters.org/prints/4074-malolos-screw-less-snap-fit-raspberry-pi-4-model-b/files
- Hooks: https://www.prusaprinters.org/prints/974-prusa-mk3-sideboxes-for-some-tools/files
- I added a slit in the top part such that the camera cable can be connected.
Note: both top and bottom part are compatible with the counter part in link #1.
Print instructions
I used prusa PETG filament.