1 / 4
Unterer Querlenker Hinten für DT-02/DT-03/DT-04 / rear lower wishbone for DT-02/DT-03/DT-04 — image 1
1 / 4

Unterer Querlenker Hinten für DT-02/DT-03/DT-04 / rear lower wishbone for DT-02/DT-03/DT-04

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

DE: Unterer Querlenker Hinten für das DT-02, 3 und 4 Chassis.EN: Rear lower wishbone for the DT-02, 3 and 4 chassis.

Rating
5 / 5
Likes
20
Downloads
111
Makes
3
Views
559
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

DE Beschreibung:

Passend für das Tamiya DT-02, DT-03 und DT-04 Chassis.

Dazu gehören:

  • Sand Viper
  • Neo Falcon
  • Desert Gator
  • Neo Fighter Buggy
  • Racing Fighter Buggy
  • Aqroshot
  • Fighter NXGEN

und noch einige mehr.

V1 ist ein Ersatzteil das dem Vorbild nachempfunden ist. V2 ist eine Tuningsteil für gröberes Gelände, um nicht so leicht an Ästen oder Steinen hängen zu bleiben.

 

EN Description: 

Fitting for the Tamiya DT-02, DT-03 and DT-04 chassis.

These include:

  • Sand Viper
  • Neo Falcon
  • Desert Gator
  • Neo Fighter Buggy
  • Racing Fighter Buggy
  • Aqroshot
  • Fighter NXGEN

and a many more.

V1 is a spare part thats based on the original part. V2 is a tuning part for rougher terrain, so get caught on branches or stones shouldn't happen so easily.

 

Druckeinstellungen/print settings:

 

Düse/Nozzel: 0.4mm/0.6mm, Schichthöhe/layer height: 0.2mm

obere und unterer Schichten/top and bottom layers: 5 layers

Wandlinien/parameters: 0.4mm = 4 Walls 0.6mm = 3 Walls

Füllung/infill: 25%

Stützstruktur/supports: keine/none

Material: PETG, Nylon, PCTG, ASA

 

Hinweis/Note: 

Muss für die Linke Seite im Slicer gespiegelt werden!

Must be mirrored in the slicer for the left side!

Tags