Grab-and-Go Gridfinity SD card holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 1x1x4 SD card bin for gridfinity with a magnetic lid to stop cards from falling out so you can take it in your bacpack
- Rating
- 5 / 5
- Likes
- 73
- Downloads
- 486
- Makes
- 5
- Views
- 3,405
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
A 1x1x4 gridfinity SD card holder that has a magnetic lid, so you can take it on the go in your backpack without the cards falling out.
Holds 14 SD cards plus a regular sized SD card slot, which I use to take a micro SD card adapter.
Uses the standard 6x2mm magnets. Be very careful with polarity for the lid! I had to throw one away after messing that up. I recommend this nice jig for help with magnets for gridfinity in general: https://www.printables.com/model/188559-gridfinity-magnet-glue-up-jig
If you are getting a lot of stringing, you might need to clean up the slots with a hobby knife - don't try a heat gun, it will easily mess up the size of the slots - ask me how i know :)
Fusion 360 file with all the parameters included. I used this gridfinity Fusion 360 template to create it: https://social.thangs.com/m/202057